Data Interpretation·Lesson 11.2·5 min read
Drug Calculations
Calculation questions test whether you can be trusted with numbers that affect patients. Interviewers care far more about a safe, methodical process than about speed. A correct answer reached through clear, checked steps is ideal. If you get it wrong but notice and correct it yourself, that still counts in your favour, because it's what a safe doctor would do.
This lesson covers how schools test calculations, a method for working through one, the units and formulas you need, and two worked examples.
How schools test calculations
Schools test this in different ways. Some ask you to work through a calculation aloud with an interviewer, usually without a calculator, so the numbers are chosen to be manageable. Leicester has a short numeracy station of mostly mental arithmetic, and UCLan sets a multiple-choice arithmetic test before the MMI. At Birmingham, the calculation station is done on a computer with no interviewer, and in recent years a basic calculator has been provided.
Working through a calculation
- 1.Write down what you know, with units, before calculating anything.
- 2.Convert everything to the same units first (usually mg and mL).
- 3.Estimate a rough answer so you know what "about right" looks like.
- 4.Carry units through every step. If the units don't cancel to what you want, the method is wrong.
- 5.Ask whether the answer makes sense. Is a diluted solution weaker than the stock? Is the volume something you could draw up in a syringe?
- 6.State the answer clearly with units, and mention that in practice you would double-check it with a colleague or pharmacist.
Units and conversions
- 1 g = 1,000 mg
- 1 mg = 1,000 micrograms (mcg or µg)
- 1 microgram = 1,000 nanograms (ng)
- 1 L = 1,000 mL
Key formulas
These formulas come up frequently in drug calculation questions:
| Quantity | Formula |
|---|---|
| Amount (mg) | concentration (mg/mL) × volume (mL) |
| Volume (mL) | amount needed (mg) ÷ concentration (mg/mL) |
| Dilution | C1 × V1 = C2 × V2 (diluent to add = V2 − V1) |
| Weight-based dose | dose per kg × body weight (kg) |
In the dilution formula, C1 and V1 are the stock concentration and the volume of stock used, and C2 and V2 are the final concentration and the final total volume. All of these concepts are covered in A level Biology and Chemistry, so you will have met them before. The challenge in an interview is applying them calmly while explaining your working out loud.
Worked examples
Example A: a weight-based dose from a liquid
A child weighing 16 kg needs paracetamol at 15 mg/kg. The oral suspension contains 120 mg in 5 mL. What volume should be given?
What you know: weight 16 kg, dose 15 mg/kg, suspension 120 mg in 5 mL.
- 1.Dose: 15 mg/kg × 16 kg = 240 mg.
- 2.Concentration: 120 mg ÷ 5 mL = 24 mg/mL.
- 3.Volume: 240 mg ÷ 24 mg/mL = 10 mL.
Check: 5 mL contains 120 mg, so 10 mL contains 240 mg.
Example B: percentage strength and a maximum dose
Lidocaine 1% is used as a local anaesthetic. The maximum safe dose in this scenario is 3 mg/kg. What is the largest volume that can be used for a 60 kg adult?
- 1.Convert the percentage: 1% = 1 g per 100 mL = 1,000 mg per 100 mL = 10 mg/mL.
- 2.Maximum dose: 3 mg/kg × 60 kg = 180 mg.
- 3.Maximum volume: 180 mg ÷ 10 mg/mL = 18 mL.
To extend the answer, you could say:
"I'd stay comfortably below the maximum, and I'd want to know whether any other local anaesthetic had already been given, because doses add up."
Common pitfalls
- Forgetting units. Dropping units, or mixing up mg and micrograms, can cause 1,000-fold errors.
- Using the distractor. Not every number given is needed (for example, height in a weight-based calculation).
- Not checking that the answer makes sense. If your answer is obviously too big or too small, you should catch it before you say it.
What's next
That's the end of the Data Interpretation module. The next module covers abstract tasks.
Put Your Knowledge to the Test
Tackle data questions from real medical school interviews with our realistic AI interviewer, then receive personalised feedback and model answers.