Data Interpretation·Lesson 12.2·6 min read
Calculations
Dentists give local anaesthetic many times a day, and the dose has to be right, because a single misplaced decimal point can give a patient ten times too much. Some dental school interviews therefore include a calculation. The maths is no harder than GCSE, so interviewers are looking at whether you work carefully, explain what you're doing and check your answer. This lesson covers the calculations you might be given, a four-step method for doing them, and the units and formulas you need.
What you might be asked
Most calculation questions describe a patient and a drug, and ask you to work out an amount. Three common kinds are:
- A dose from a patient's weight. "A drug is given at 10 mg per kg of body weight. Your patient weighs 50 kg. What dose do they need?"
- A volume from a concentration. "The drug comes as a solution with 200 mg in every 10 ml. What volume do you give?" This is often the second part of a weight question.
- A rate over time. "The drug is diluted to 100 ml and given over 30 minutes. What rate do you set?"
You're usually asked to work through the calculation aloud with an interviewer and without a calculator, so the numbers are chosen to be manageable.
How to do a calculation
We recommend four steps:
- 1.Confirm the objective. Say what you're being asked to work out, and in what units.
- 2.Confirm the method. Say how you're going to work it out, before you use any numbers.
- 3.Calculate. Work through it slowly and out loud, with the units at every step.
- 4.Check the answer. Ask whether it's roughly the size you would expect.
An example, step by step
The rest of this lesson goes through each step in more detail, using this question:
"A 30-year-old patient weighing 60 kg needs a local anaesthetic. You are using 2% lidocaine, which comes in 2.2 ml cartridges. For this question, take the maximum dose as 4.4 mg per kg of body weight. What is the largest number of cartridges this patient can be given?"
Step 1: Confirm the objective
Read the question to the end, and work out which of the numbers you need. Questions often include information that you don't need, to see whether you can pick out what matters. Then tell the interviewer what you're going to find. For this question, you could say:
"I'm being asked for a number of cartridges, which is the most this patient can have. It's a maximum dose based on weight, so I need the weight, the maximum dose per kilogram, the strength of the lidocaine and the volume of a cartridge. I've also been given the patient's age, but I don't need it."
Step 2: Confirm the method
Explain your plan before you do any arithmetic. If your plan is wrong, the interviewer can point it out at this stage, before you've spent time on it. Check the units at this step too, and say if any need converting. For this question, you could say:
"First I'll work out the maximum dose, which is the dose per kilogram multiplied by the weight. Then I'll work out how much lidocaine is in one cartridge, which is the amount in each millilitre multiplied by the volume of the cartridge. The number of cartridges is the maximum dose divided by the amount in one cartridge. The strength is given as a percentage, so I'll convert it first. 2% means 2 grams in 100 millilitres, which is 20 milligrams in each millilitre."
Step 3: Calculate
Do one small calculation at a time, and say each one out loud with its units. If the units at the end aren't the ones you were asked for, there is a mistake in your working. For this question, you could say:
"The maximum dose is 4.4 milligrams per kilogram times 60 kilograms, which is 264 milligrams. One cartridge has 20 milligrams in each millilitre times 2.2 millilitres, which is 44 milligrams. So the number of cartridges is 264 divided by 44, which is 6."
Step 4: Check the answer
Before you give your final answer, check that it's a sensible size. The easiest way is to compare it with the numbers in the question. If you notice a mistake, say so and correct it out loud, because finding your own error is what a safe dentist does. For this question, you could say:
"One cartridge holds 44 milligrams, which is ten times 4.4, so one cartridge is the maximum for 10 kilograms of body weight. The patient weighs 60 kilograms, so 6 cartridges makes sense. My answer is a maximum of 6 cartridges, and in practice I'd check it with a colleague before giving it."
This check catches the two most common mistakes. A candidate who reads 2% as 2 mg in each ml gets 60 cartridges, and a candidate who forgets the volume of the cartridge gets about 13. Neither answer is close to one cartridge for every 10 kg.
The units and formulas you need
You'll have met all of these at school, but check that you can use them quickly.
| Units | |
|---|---|
| Weight | 1 g = 1,000 mg, and 1 mg = 1,000 micrograms |
| Volume | 1 litre = 1,000 ml |
| Percentage strength | 1% means 1 g in 100 ml, which is 10 mg in each ml |
| To find | Calculate |
|---|---|
| A dose from weight | dose per kg × weight in kg |
| The amount of drug in a volume | concentration × volume |
| The volume that contains a dose | dose ÷ concentration |
| A rate | amount ÷ time |
After the calculation
Interviewers often add a second question once you have your answer. Some extend the calculation. For example, if the patient above were a child weighing 20 kg, the maximum dose would be 4.4 mg per kg times 20 kg, which is 88 mg, and that is 2 cartridges.
Others ask about the drug, such as "What might happen if the patient were given too much?" You aren't expected to know the drug, so reason from what you've been told about it. A local anaesthetic numbs an area by stopping the nerves there from sending signals, so too much of it could affect nerves in the rest of the body, including those in the brain and the heart.
What's next
The next module covers abstract tasks, such as giving instructions and describing a picture.
Put Your Knowledge to the Test
Tackle data questions from real dental school interviews with our realistic AI interviewer, then receive personalised feedback and model answers.